TRMR

reload

How to load:

Please ensure the device is in SAFE mode by twisting the top half of the device anticlockwise until it stops and you can see the word “SAFE” in the middle of the device.Unscrew the base of the device and load with the appropriate munitions for your Operation/Mission. Screw the base back onto the device. (The Device is now LOADED).

How to deploy:

Please ensure the device is in SAFE mode by twisting the top half of the device anticlockwise until it stops and you can see the word “SAFE” in the middle of the device.Unscrew the base of the device and load with the appropriate munitions for your Operation/Mission. Screw the base back onto the device. (The Device is now LOADED).

Twist the top half of the device clockwise ½ turn until it stops and you can see the RED band. (The Device is now ARMED). To safely deploy T.R.M.R. Device release away from your person into intended area of deployment. While the device is armed please be aware that any sudden shock or impact on the device will cause it to operate and discharge its munitions.

(Please note that the Device needs to be deployed from a minimum height of 50cm on to a hard surface or deck for the inertia recoil firing system to operate and successfully discharge its munitions).

How to reload:

Please retrieve and follow “How to load” steps with the exception of removing the spent munitions, ensuring all decontamination steps are followed if chemical CS munitions have been used.

T.R.M.R. Operational Version (OV)
(Supplied with 12 Gauge base) For Maritime Export Use
T.R.M.R. Special Operations Version (SOV)
(Supplied with 12 Gauge Chemical Irritant Discharge Base) For Maritime Special Operations Use
T.R.M.R. Maritime Battle Simulation Version (MBSV)
(Supplied with 12 Gauge Primer or 9mm Blank Base) For Maritime Export Use